The past week I’ve been focusing on the N/S rear quarter.
First off back to bare metal to see what we’ve got. There’s a bit of a dent towards the back of the panel but on the whole it’s not too bad.
I found a few sections around the sliding door seal channel which needed fresh metal letting in, so I made up some repairs in my folder:
Followed by days and days of filler work (must be close to 20hrs to get to this point, even though it doesn’t look like much!):
And finally today I got it all epoxied. I’m really happy with this panel!
I also re painted the bottom of the corner, having reshaped the area where the battery tray welds were visible:
Onto the O/S rear quarter this week, the final panel!
