Entries by Jim Ley

Guest Author

There is a guest author writing the blog today, my ineffable wife.   Hey guys, I’m Max, Jim’s wife and seeing as I spent the day doing the majority of the work 😉 Jim asked me to write the blog this week. So initially yesterday, Jim spent the day masking up the majority of the underside […]

Van underside all prepped and ready for its final coat of epoxy mastic.

Van underside all prepped and ready for its final coat of epoxy mastic.

Running Gear Refurb – Part 1

I’ve stripped down all of the running gear. Thankfully most of it is in good nick. I’ll need a new drag link, and one ball joint, and I’ll renew all the rubber boots as they’ve seen better days and the bolts. Ready to go off to the shot blasters: All blasted and looking like new […]

Propex Heater – Part 1

Keen for us to have a bit of heat in the van I’m installing a propex heater under the driver’s seat.  I made up a little platform for it to sit on in the metal folder: Then very tentatively cut a hole in the driver’s cubby space to allow the propex to drop into the […]

LPG Setup – Part 1 – Gas Tank

I was keen to fit an underslung LPG tank to our van to free up valuable interior space, and to me it seems safer keeping the gas outside the van.  I opted for a Gasit 20L easyfit tank. This makes fitting the tank really easy as it comes with welded feet that simply need attaching to […]

Heating ducting

I’ve finished up the heating ducting this week. Y piece welded in: Repaired the piece that sits under the walkthrough, and welded back in: Fabricated a tube to pass through the cross member as the original was beyond repair. I’d thrown the old one out so had nothing to go from, I kept it simple […]

Fitting the heating ‘y piece’ to Iris. This piece is a right pain to fit so I thought it worth sharing how I went about it as it may help others trying to do the same job. (Source: https://www.youtube.com/)

Van back on the rollover jig for the final time so I can stonechip the wheel arches and give it all some paint plus a few odd jobs.

The results of spending all weekend sanding out the engine bay and fuel tank shelf. Then getting some epoxy mastic onto it tonight! So worth it.